Abstract
Biomass and low rank fuel gasification is a very promising process for conversion of fuels to a high quality fuel (Syngas). In the present paper research work on the design of a high pressure entrained flow gasifier for biomass based fuels is shown.Atomization quality of twin fluid nozzles as a function of gas velocity and reactor pressure is analyzed. The developed and characterized atomizers are used in an atmospheric entrained flow gasifier, to detect the influence of spray quality on gasification process. Furthermore, a CFD model of a high pressure entrained flow gasifier was developed.A significant influence of gas velocity and reactor pressure on Sauter Mean Diameter (SMD) of the produced spray was detected. Increasing gas velocity decreases the SMD, whereas increasing reactor pressure leads to the increase in drop diameter. An influence of SMD on gasification process was observed from organic carbon and methane concentration measurements as well as from the radial temperature profiles at various positions along the reactor centerline. Finally the CFD model of high pressure entrained flow gasification of biomass based slurries shows a very pronounced influence of drop size distribution on gasification quality.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.