Abstract
Analysis of the surface of thin Irganox 1010 films before and after sputtering with an argon gas-cluster ion beam was performed with AFM and XPS to determine the effect that Zalar rotation has on the chemistry and morphology of the surface. The analysis is based on the change in roughness of the surface by comparing the same location on the surface before and after sputtering. The ion beam used was an of size n = 1000 and energy 4 keV. The XPS analysis agreed with previous results in which the ion beam did not cause measurable accumulation of damaged material. Based on the AFM results, the Irganox 1010 surface became rougher as a result of ion sputtering, and the degree of roughening was quantified, as was the sputter rate. Furthermore, Zalar rotation during ion sputtering did not have a significant effect on surface roughening, surprisingly.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: Journal of Vacuum Science & Technology A: Vacuum, Surfaces, and Films
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
