Abstract
PurposeThis paper aims to develop a fuzzy logic-based algorithm to predict the intermetallic compound (IMC) size and mechanical properties of soldering material, Sn96.5-Ag3.0-Cu0.5 (SAC305) alloy, at different levels of temperature. The reliability of solder joint in materials selection is critical in terms of temperature, mechanical properties and environmental aspects. Owing to a wide range of soldering materials available, the selection space finds a fuzzy characteristic.Design/methodology/approachThe developed algorithm takes thermal aging temperature for SAC305 alloy as input and converts it into fuzzy domain. These fuzzified values are then subjected to a fuzzy rule base, where a set of rules determines the IMC size and mechanical properties, such as yield strength (YS) and ultimate tensile strength (UTS) of SAC305 alloy. The algorithm is successfully simulated for various input thermal aging temperatures. To analyze and validate the developed algorithm, an SAC305 lead (Pb)-free solder alloy is developed and thermally aged at 40, 60 and 100°C temperature.FindingsThe experimental results indicate an average IMCs size of 5.967 (in Pixels), 19.850 N/mm2 YS and 22.740 N/mm2 UTS for SAC305 alloy when thermally aged at an elevated temperature of 140°C. In comparison, the simulation results predicted 5.895 (in Pixels) average IMCs size, 19.875 N/mm2 YS and 22.480 N/mm2 UTS for SAC305 alloy at 140°C thermally aged temperature.Originality/valueFrom the experimental and simulated results, it is evident that the fuzzy-based developed algorithm can be used effectively to predict the IMCs size and mechanical properties of SAC305 at various aging temperatures, for the first time.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
