Abstract
The interphase between reinforcing fibre and matrix is a controlling element in composite performance. We deposited multi-walled carbon nanotubes (MWCNTs) onto electrically insulating glass fibre surfaces leading to the formation of semiconductive MWCNT–glass fibres and in turn multifunctional fibre/polymer interphases. The deposition process of MWCNTs onto glass fibre surfaces involved both electrophoretic deposition (EPD) and conventional dip coating methods. The EPD coating method produces a more homogeneous and continuous nanotube distribution on the glass fibre surface compared with the dip coating. According to fragmentation test results, the interphase with a small number of heterogeneous MWCNTs in the EPD fibre/epoxy composites, mimicking a biological bone structure, can remarkably improve the interfacial shear strength. We found that the semiconductive interphase results in a high sensitivity of the electrical resistance to the tensile strain of single glass fibre model composites. This material provides a possible in situ mechanical load sensor and early warning of fibre composite damage.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
