Abstract
The self-forming dynamic membrane coupled bioreactor (SFDMBR), which uses coarse pore-sized material to separate solids and liquids in a bioreactor, has some advantages compared with membrane bioreactor (MBR) using micro-/ultra-filtration membranes such as low module cost and high flux. In this study, we investigate the microbial activity change of a self-forming dynamic membrane (DM) during its bio-fouling process by a microelectrode for O2. At a high flux of 40L/m2h, the dissolved oxygen was determined to be depleted at the depth of 1.5–2.0mm in the self-forming DM. Based on the dissolved oxygen concentration profiles in the self-forming DM, a reliable and simple model and computational procedure were developed to estimate the biokinetic parameters in the self-forming DM. Sensitivity analysis of the model revealed that the dissolved oxygen profiles are sufficiently sensitive to the maximum specific rates of oxygen uptake (q⌢max,20), which were computed to be within the range of 3.8–11.1mg O2/gSSh. q⌢max,20 decreased sharply in the first 5 days with the development of the bio-fouling process in the surface cake layer of the self-forming DM and then reached a relatively steady state afterwards. The Monod half-saturation coefficient for oxygen (Ko) was computed to be in the range of 0.16–0.75mgO2/L. In summary, the results gave new experimental evidence on the change of microbial activity in the self-forming DM during its bio-fouling process.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.