Full-field in vivo imaging of nanoparticles using benchtop cone-beam XFCT system with pixelated photon counting detector

Abstract

Objective. X-ray fluorescence computed tomography (XFCT) is a promising noninvasive technique for in vivo imaging of high-Z elements (e.g. gadolinium (Gd) or gold (Au)). In this study we upgraded our experimental XFCT system using a flat panel photon counting detector with redesigned pinhole collimation in order to achieve 3D XFCT images during one scan. Approach. Aiming at the characteristics of pinhole-collimated cone-beam XFCT imaging, a new scatter correction algorithm was proposed to estimate the normalized spectrum of scatter background based on K–N formula and realize correction by a weighted least squares method. Then, images were quantitatively reconstructed by a maximum likelihood iterative algorithm with the attenuation correction. Main results. The potential on full-field in vivo XFCT imaging of this new system was investigated. An imaging experiment of a PMMA phantom with the diameter of 35 mm was carried out for quantitative evaluation of the system performance. Results show that 2 mg ml−1 Gd solutions can be successfully reconstructed with a 45 min cone-beam XFCT scan. In vivo XFCT imaging experiments of mice with injection of Gd nanoparticles (GdNPs) were also performed and demonstrated in this paper. A mouse was injected through the tail vein with 20 mg ml−1 NaGdF4 solution and then anesthetized with isoflurane during the cone-beam XFCT scan. Significance. The distribution of the GdNPs inside the mouse can be well reconstructed so that the deposition of NPs in vivo can be clearly observed, which indicates the feasibility of the proposed system for full-field XFCT of small animals and further potential in relevant in vivo research.