Full Utilization of Lithium Trivandate (Li1.1V3O8) in Thick Porous Electrodes with High Rate Capacity upon Extended Cycling Elucidated Via Operando Energy Dispersive X-Ray Diffraction

Abstract

Newer, more demanding energy storage systems require high energy density along with high power and fast charge rates. Conventional battery electrode fabrication techniques are often limited by how much active material they can hold in the case of slurry-cast electrodes and how much of the electrode can be utilized in the case of dense pelletized electrodes. Thick porous electrode fabrication techniques have been developed as a way to obtain a higher active mass loading and an architecture which enables ionic and electronic transport. The homogeneity of the phase distribution of lithiated LVO in thick (∼500 μm) porous electrodes (TPEs) designed to facilitate both ion and electron transport was determined using synchrotron-based operando energy dispersive X-ray diffraction (EDXRD). Probing 3 positions in the TPE while cycling at a fast rate of 1C revealed a homogeneous phase transition across the thickness of the electrode at the 1st and 95th cycles. Continuum modelling indicated homogenous lithiation across the electrode upon discharge at 1C consistent with the EDXRD results and ascribed decreasing accessible active material to be the cause of loss in delivered capacity between the 1st and 95th cycles. The model was supported by the observation of significant particle fracture by SEM consistent with loss of electrical contact. The absence of the beta phase peaks in the EDXRD over extended cycling are consistent with electrochemical accessibility of only part of the active material. Overall, the combination of operando EDXRD, continuum modeling, and ex situ measurements enabled a deeper understanding of lithium vanadium oxide transport properties under high rate extended cycling within a thick highly porous electrode architecture.