Friction reduction and viscosity modification of cellulose nanocrystals as biolubricant additives in polyalphaolefin oil

Abstract

With the increasing requirement of environmental protection, the development of lubricating materials with non-toxicity and good biodegradability becomes more and more significant. As the novel green nanomaterial derived from natural cellulose, cellulose nanocrystals (CNCs) in the present work were prepared from native cotton and added into polyalphaolefin (PAO) base oil as the lubricant additive. To improve the compatibility of CNCs with PAO, the surface of CNCs were grafted by stearoyl chains, which entangled with polyolefin chains and led to a good dispersibility and stability of the colloidal solution. This hybrid oil with the elevated viscosity improved the formation of lubricant film in the boundary lubrication regime. Combining with the mending effect of CNC particles on the surface roughness and scars, both the friction and the wear were dramatically reduced. Specifically, the introduction of 2 wt% modified nanocrystals (mCNC) in PAO base oil reduced the coefficient of friction (COF) by 30%. The results of this study suggest that cellulose nanocrystal is a promising ecofriendly and effective lubricant additive.