Frequency‐tunable resonant hybrid vibration energy harvester using a piezoelectric cantilever with electret‐based electrostatic coupling

Abstract

AbstractHybrid vibration energy harvesting technology converts vibration energy into electricity using multiple transduction mechanisms to improve output power. A frequency‐tunable resonant hybrid vibration energy harvester using a piezoelectric cantilever with electret‐based electrostatic coupling is proposed in this article. The electrostatic coupling including electrostatic force coupling and electrical damping coupling is introduced by an electret film placed below the cantilever, where the electrostatic force acting on the cantilever realises a tunable resonant frequency and additional electrical damping boosts power output. A coupling electromechanical model is derived using Euler–Bernoulli beam theory and Kirchhoff's law. By investigating the static and dynamic stability of cantilever, the maximum electret surface potential is defined to prevent the pull‐in phenomenon. The damping of the device is evaluated, and the optimal electret surface potential is determined to obtain the matching of the electrical and mechanical damping for maximum power output. The resonant frequency of hybrid vibration energy harvester can be adjusted in range of 176.1 rad/s by changing the electret surface potential and resistive load. The experimental output power of hybrid vibration energy harvester was 5.2 μW, 27.4 times higher than that of the individual piezoelectric generator. The proposed hybrid vibration energy harvester exhibits a promising potential to power microelectronic devices and wireless sensor network node.