Frequency Domain Versus Travel Time Analyses of TDR Waveforms for Soil Moisture Measurements

Abstract

When time domain reflectometry (TDR) is applied to the field characterization of soil moisture, the waveforms have typically been analyzed using travel time along the wave guide. The apparent dielectric constant traditionally determined by the travel time analysis using a tangent-line method does not have a dear physical meaning and is influenced by several system and material parameters. The frequency domain analysis, however, can determine the actual frequency-dependent dielectric permittivity and can be performed using a very short probe. This study presents a numerical modeling approach for common unmatched TDR probes to analyze the TDR signals in the frequency domain. This approach is also adopted to examine how TDR bandwidth, probe length, probe impedance, dielectric relaxation, and electrical conductivity affect travel time analysis. Simulation results indicated that, although the effects of TDR bandwidth and probe length could be quantified and calibrated, the calibration equation for soil moisture measurements was still affected by dielectric relaxation and electrical conductivity, because of differences in soil texture and density. The effects of density can be removed by adding a density term to the calibration equation. Correlating with water content the dielectric permittivity at frequencies between 500 MHz and 1 GHz, rather than the apparent dielectric constant, can minimize the influence of soil texture.