Abstract

For decades, bad practices in municipal and industrial waste management have had negative environmental impacts, generating high health risks for people and the environment. The use of badly designed, not engineered, and not well-operated landfills has, around the world, produced a large number of potentially contaminated sites, for which there are urgent needs to assess the actual risk and to proceed, in case, with reclamation activities. One of these sites, an abandoned waste disposal site located near a Site of Community Importance on the central-eastern coast of Sardinia (Italy), is the subject of the case history described in this work. As a part of a multi-method geophysical characterisation, a frequency-domain electromagnetic (FDEM) mapping survey was carried out with the specific aim of detecting the presence of buried materials (waste) and of delineating the lateral extent of the landfill by identifying the electrical conductivity anomalies produced, for the most part, by the conductive waste fill. Using an EM31 device in the vertical-dipole configuration, at a height of 0.9 m above the ground, both quadrature and in-phase electromagnetic responses were collected over a 7-hectare area with elevation varying between 6 m and 2.8 m above sea level. After removing the measurements identified as data coming from any recognisable surface man-made features within the survey area or near its perimeter, the filtered quadrature response (expressed as apparent conductivity) ranged from 5.5 mS/m to about 188.6 mS/m. All values are beyond the low induction number (LIN) condition and valid for the classical EM31 mapping, thus requiring advanced data processing. To obtain undistorted, meaningful, and interpretable high-resolution maps, measured data have been processed to correct the bias, introduced by the nonlinearity of the device, as a function of height above ground and the topography. The comparative analysis of the apparent conductivity map, obtained by the properly processed EM31 data and some aerial photos that clearly documented the site history, has allowed unequivocal delineation of the landfill extent, in good agreement with the results obtained with other geophysical methods (not described in this paper) and with the ground truthing data provided by three boreholes, which were core-drilled at the end of the study at three locations selected on the basis of the apparent conductivity map.

Highlights

  • IntroductionIn developed and industrialised countries, landfills for municipal and industrial solid waste disposal are, nowadays, well-designed, constructed, and operated so as to ensure minimal environmental impact in the surrounding areas

  • This article is an open access articleIn developed and industrialised countries, landfills for municipal and industrial solid waste disposal are, nowadays, well-designed, constructed, and operated so as to ensure minimal environmental impact in the surrounding areas

  • In a follow-up geophysical survey, based on the results described in this work, a total of 14 electrical resistivity tomography (ERT) and induced polarisation tomography (IP) profiles were conducted, thirteen of which were inside, and one was outside the area (Figure 20a)

Read more

Summary

Introduction

In developed and industrialised countries, landfills for municipal and industrial solid waste disposal are, nowadays, well-designed, constructed, and operated so as to ensure minimal environmental impact in the surrounding areas. To prevent or reduce health risks for the population and the environment related to the past bad practices in landfill management, the Council of the European Union has enacted stringent measures (Directive 1999/31/EC) [1] for landfill management, enforcing reclamation of all existent landfill areas in European countries. To implement these European instructions and guidelines, in 2003 the Sardinian Regional Government

Objectives
Methods
Results
Conclusion
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call