Abstract
We have reported a detailed investigation of frequency dependent properties of the Au/perylene-monoimide (PMI)/n-Si Schottky diodes in this study. Schottky diodes based on PMI have been fabricated by spin coating method. The capacitance–voltage (C–V) and conductance–voltage (G–V) characteristics have been measured in the frequency range from 30kHz to 1MHz at room temperature. The values of measured capacitance Cm and conductance Gm under both reverse and forward bias have been corrected for the effect of series resistance to obtain the real diode capacitance and the conductance values. The density of interface states (Dit) distribution profiles as a function of frequency has been extracted from the corrected C–V and G–V measurements. Interface trap states of the PMI/n-Si Schottky device have decreased by increasing the applied frequency and were found to be 8.13×1011 and 1.75×1011eV−1cm−2 for 30kHz and 1MHz, respectively.
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call