Abstract
Experimental investigations have been performed on unidirectional glass fibre reinforced/epoxy composites in Mode II (Forward shear) with the presence of crack parallel to the fibres direction through the use of end-cracked beam. A concentrated load at the Centre of the beam produced bending-induced shear deformation at the crack tip. Calibration factors for Mode II have been obtained. The stress-intensity factor at instability K IIR(INR) is obtained by experiments on a small end cracked beam through a compliance matching procedure. The crack growth resistance at instability and the corresponding critical strain energy release rate are independent of initial crack in the range of crack length investigated. In composite materials, fibre-matrix interfacial shear stress play an important role in load transfer mechanism: hence Mode II study may be very useful to analyse the interfacial mechanisms and to understand the fracture behaviour of unidirectional fibre reinforced composites in Mode I when load is applied in the direction of the fibres.
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call