Abstract
BaTiO3 particles were prepared by heating a suspension of titania derived from the hydrolysis of titanium isopropoxide in a barium hydroxide [Ba(OH)2] aqueous solution. Well-crystallized cubic phase BaTiO3 fine particles were obtained by heating at a temperature >328 K for 24 h. The morphology and size of the obtained particles were affected by the reaction temperature and the Ba(OH)2/titanium alkoxide molar ratio. The secondary particles with a larger size were obtained at a lower reaction temperature. The nucleation process of BaTiO3 depended on the reaction temperature. The formation mechanism of BaTiO3 and the formation kinetics were investigated by measuring the concentrations of Ba2+ ions in the solution during the heating process. The BaTiO3 particle formation occurred on the surface of the titania particles after strong adsorption of the Ba2+ ions from the solution. The experimental results showed that the heterogeneous nucleation of BaTiO3 occurred on the titania surface.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.