Abstract
We examined the formation of the ternary complex hydride phase Mg2FeH6 during the thermal hydrogen absorption of a ball-milled powder mixture of MgH2 and Fe. Analytical measurements, scanning transmission electron microscopy, and electron energy-loss spectroscopy, with the sample cooled to liquid nitrogen temperature, were utilized to identify the various phases present and to study the features of this phase transformation. The low-loss region of the electron energy-loss spectrum was mainly used to distinguish various constituents. Mg2FeH6 was initially formed during ball milling of MgH2 and Fe, demonstrating a co-continuous structure with MgH2 and Mg. Upon the first desorption, this phase was transformed into elemental Mg and Fe. During the initial stages of the subsequent thermal absorption, MgH2 was first formed with enhanced kinetics because of the presence of Fe. This was followed by the nucleation of Mg2FeH6 between MgH2 and Fe and its growth with a columnar morphology. This morphology was dictated by the diffusion direction of the atomic hydrogen from the catalytic Fe cap. As the Mg2FeH6 columns grew, the capping Fe particle and the MgH2 substrate were consumed. When the system was maintained at high temperature for a long time, these columnar Mg2FeH6 structures coalesced into a semispherical morphology.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.