Abstract
We report on the formation of low-resistance Ohmic contacts to N-face n-GaN for high-power vertical light-emitting diodes using an Al–Ga solid solution (50 nm)/Ti(30 nm)/Al(200 nm) scheme and compare them with Ti(30 nm)/Al(200 nm) contacts. The Al–Ga solid solution layer is introduced to minimize the formation of Ga vacancies near the N-face n-GaN surface. It is shown that, unlike the Ti/Al contacts, the Al–Ga solid solution/Ti/Al contacts exhibit Ohmic behavior with a resistivity of 4.1×10−4 Ω cm2, even after annealing at 250 °C. X-ray photoemission spectroscopy and secondary ion mass spectrometry examinations are performed to understand the temperature dependence of the electrical properties.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.