Abstract

Formation character of brominated-trihalomethanes (Br-THMs) in chlorinated seawater and its dependence on applied chlorine dose, reaction time, and temperature were investigated in the laboratory. Seawater was collected from the east coast of India and a chlorine dose of 1, 3, 5, and 10 ppm was each applied at a temperature of 20, 30, and 40 degrees C to investigate the yield and kinetics of Br-THMs formation. Qualitative and quantitative estimation of THM formation at various intervals of time ranging from 5 min to 168 h was determined by a gas chromatograph equipped with an electron capture detector (GC-ECD). Chlorine dose, chlorine contact time, and reaction temperature positively affected the load of THMs. The ratio of chlorine dose to halogen incorporation decreased from 12% to 5% with increasing applied chlorine dose from 1 to 10 ppm. Significant levels of THMs were found to be formed within 0.5 h of reaction, followed by a very slow rate of formation. Elevated temperature favored both increased rate of formation and overall THM yield. The formation order of different trihalomethane species at all studied temperatures was observed to be bromodichloromethane (CHCl2Br) < dibromochloromethane (CHClBr2) < bromoform (CHBr3). Formation of chloroform was not observed, and bromoform was the dominant (96% to 98%) among the three THM species formed.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.