Formaldehyde emission from PVC–wood composites containing MDF sanding dust

Abstract

The main purpose of this work was to study the formaldehyde emission from wood plastic composites (WPCs) containing polyvinyl chloride (PVC), wood flour, and sanding dust of medium density fiberboard (MDF). Wood floor was replaced with 10, 15, and 20% MDF sanding dust (as a wood‐based panel waste), and the composites were manufactured by the extrusion method. Formaldehyde emission from WPCs was measured using two different methods: the desiccator method according to ISO 12460 and the flask method according to EN717‐3. Moreover, the physical and mechanical properties of the WPC samples were determined. The results indicated that the use of MDF sanding dust in formulation of WPCs leads to higher formaldehyde emission. The composites with higher content of MDF sanding dust exhibited higher formaldehyde emission. Although the PVC composites containing MDF sanding dust release formaldehyde, the formaldehyde emission values were very low. Therefore, these composites can be considered to be green composites and there is no concern in their indoor applications. J. VINYL ADDIT. TECHNOL., 25:159–164, 2019. © 2018 Society of Plastics Engineers