Abstract

The release of engineered nanomaterials (ENMs) to the environment necessitates an assessment of their environmental risks. The currently available environmental risk assessments (ERA) for ENMs are based on an analysis of the total flows of a specific ENM to the environment and on ecotoxicity studies performed with pristine ENMs. It is known that ENMs undergo transformation during product use and release and in technical systems such as wastewater treatment. The aim of the present study was therefore to perform an ERA of 3 ENMs (nano‐Ag, nano‐TiO2, and nano‐ZnO) based on a form‐specific release model and a form‐specific analysis of ecotoxicological data. Predicted environmental concentration values were derived using a form‐specific material flow model. Species sensitivity distributions were used to derive predicted‐no‐effect concentrations (PNECs) for the pristine ENMs and for dissolved and transformed Ag and ZnO. For all ENMs, the matrix‐embedded form was included in the assessment. A probabilistic assessment was applied, yielding final probability distributions for the risk characterization ratio (RCR). For nano‐Ag, the form‐specific assessment resulted in a decrease of the mean RCR from 0.061 for the approach neglecting the different release forms to 0.034 because of the much lower PNEC of transformed Ag. Likewise, for nano‐ZnO, the form‐specific approach reduced the mean RCR from 1.2 to 0.86. For nano‐TiO2, the form‐specific assessment did not change the mean RCR of 0.026. This analysis shows that a form‐specific approach can have an influence on the assessment of the environmental risks of ENMs and that, given the availability of form‐specific release models, an updated ERA for ENMs can be performed. Environ Toxicol Chem 2021;40:2629–2639. © 2021 The Authors. Environmental Toxicology and Chemistry published by Wiley Periodicals LLC on behalf of SETAC.

Highlights

  • Engineered nanomaterials (ENMs) are widely used in many commercial products and applications and can be released into the environment during their whole life cycle

  • The first models providing quantitative data on flows of different form of ENM to the environment have become available, and the present study reports how this information can be used for a form‐specific environmental risk assessments (ERA) of nano‐TiO2, nano‐Ag, and nano‐ZnO

  • The matrix‐embedded form was included in our assessment by considering the concentration of surface‐ exposed ENM and assuming that their toxicity can be described by the pristine ENM

Read more

Summary

Introduction

Engineered nanomaterials (ENMs) are widely used in many commercial products and applications and can be released into the environment during their whole life cycle. Material flow analysis (MFA) is a method that can quantify the environmental emissions of substances throughout the life cycle of products (Brunner and Rechberger 2004). A suite of MFA models has been developed over the last 12 yr to predict the flows of ENMs to the environment (Hendren et al 2013; Baalousha et al 2016; Wigger et al 2020a). These models consider as input data the production of ENMs, the use of ENMs in various. An example is nano‐Ag contained in textiles, where many studies have wileyonlinelibrary.com/ETC

Objectives
Methods
Results
Discussion
Conclusion
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call