Abstract

Air conditioning in buildings accounts for 60% of the total energy consumption. Therefore, accurate predictions of energy consumption are needed to properly manage the energy consumption of buildings. For this purpose, many studies have been conducted recently on the prediction of energy consumption of buildings using machine learning techniques. The energy consumption of the air handling unit (AHU) and absorption chiller in an actual building’s air conditioning system is predicted in this paper using prediction models that are based on artificial neural networks (ANNs), which simply and accurately allow us to forecast energy consumption with limited variables. Using these ANN models, the energy usage of the AHU and chiller could be predicted by collecting a month’s worth of driving data during the summer cooling period. After the forecast models had been verified, the AHU prediction model showed performance in the ranges of 13.27% to 15.25% and 19.42% to 19.53% for the training period and testing period, respectively, and the mean bias error (MBE) ranges were 4.03% to 4.97% and 3.48% to 4.39% for the training period and testing period, respectively. The chiller prediction model satisfied the energy consumption forecast performance criteria presented by American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE) guideline 14 (the measurement of energy and demand savings), with a performance of 24.64~25.58% and 7.12~29.39% in the training period and testing period, respectively, and MBE ranges of 2.59~3.40% and 1.35~2.87% in the training period and testing period, respectively. When the training period and testing period were combined for the AHU data, the actual energy usage forecast showed a lower error rate range of 0.22% to 1.11% for the training period and 0.17% to 2.44% for the testing period. For the chiller data, the error rate range was 0.22% to 2.12% for the entire training period, but was somewhat higher at 11.67% to 15.18% for the testing period. The study found that, even if the performance criteria were met, high accuracy results were not obtained, which was due to the poor data set quality. Although the forecast model based on artificial neural network can achieve relatively high-accuracy results with sufficient amounts of data, it is believed that this will require a thorough verification of the data used, as well as improvements in the predictive model to avoid overfitting and underfitting, to achieve such good results.

Highlights

  • Buildings use a substantial amount of energy to provide a pleasant environment for occupants and residents

  • When the training period and testing period were combined for the air handling unit (AHU) data, the actual energy usage forecast showed a lower error rate range of 0.22% to 1.11% for the training period and 0.17% to 2.44% for the testing period

  • The forecast model based on artificial neural network can achieve relatively high-accuracy results with sufficient amounts of data, it is believed that this will require a thorough verification of the data used, as well as improvements in the predictive model to avoid overfitting and underfitting, to achieve such good results

Read more

Summary

Introduction

Buildings use a substantial amount of energy to provide a pleasant environment for occupants and residents. This research team is developing a centralized air conditioning system and energy management technique for BEMS applications and has researched energy consumption and load predictions based on ANN (Artificial Neural Networks). Using ANN models, the team conducted a prediction study of chiller energy consumption and achieved results that satisfy the American Society of Heating, Refrigerating, and Air-Conditioning Engineers (ASHRAE) criteria, with an average CV(RMSE) of. The team conducted studies to optimize the cooling load prediction model based on MATLAB’s NARX (with eXigenous) Feedforward Neural Networks model to confirm that a forecast accuracy of less than 7% CV(RMSE) can be obtained depending on the conditions [18]. The prediction accuracy of the ANN prediction model was investigated using both the air handling unit (AHU) and absorption chiller operations data from an actual building

ANN Model for Predicting Energy Consumption
Collection of AHU and Absorption
Prediction
Structural and Learning
Preprocessing and Training Size
Performance Evaluation Indicators for Predictive Models
Accuracy of Prediction Models
Results
Conclusions
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call