Synergy Effect of High K-Low Ca-High Si Biomass Ash Model System on Syngas Production and Reactivity Characteristics during Petroleum Coke Steam Gasification

Abstract

The synergy effect of high K-low Ca-high Si biomass ash-based model system (BAMS) on the synthesis gas output and reaction characteristics of petroleum coke (PC) steam gasification process was studied using three biomass ash (BA) components, KCl, SiO2, and CaCO3, which were used as the model compounds. In the ternary model system, the steam gasification experiment of PC was conducted using a fixed bed reactor and gas phase chromatography. The synergistic effects of binary and ternary components in the ternary model system on the gasification of PC were obtained. These investigations were based on the data from the gas analysis and examined the gasification reaction process, syngas release behavior, and reaction characteristics. This study examined the effects of binary and ternary components in the ternary model system on the evolution of semi-char structure during PC gasification. This correlation revealed the synergistic effect of the model system on PC gasification. Scanning electron microscope (SEM) and Raman spectroscopy were used to characterize the structure and surface microstructure of the gasification semi-char. The results showed that the yields of different gases in the ternary model system were in H2 > CO > CO2. Compared with single PC gasification, the yields of H2, CO, syngas, and carbon conversion were increased by 29.42 mmol/g, 20.40 mmol/g, 56.68 mmol/g, and 0.35, respectively. All other components in the ternary model system with high K-low Ca-high Si demonstrated catalytic effect, except for SiO2 and the Ca-Si system, which showed inhibitory effects on syngas release and reaction features. Integrating SEM and Raman spectroscopic analyses, it was elucidated that CaCO3 and KCl diminished the degree of graphitization in semi-char through interactions with the carbonaceous matrix. This phenomenon facilitated the gasification process and exhibited a synergistic effect. Secondly, SiO2 will react with CaCO3 and KCl, producing inert silicates and inactivating these compounds, leading to the decline of catalysis.