Abstract
Magnetic field assisted finishing process is a nanofinishing process which uses magnetic field for precise control of finishing forces. Magnetorheological fluid mixed with diamond abrasive particles in base medium of glycerol, hydrofluoric acid, nitric acid, and deionised water is used as the polishing medium. The novel tool is a magnet fixture made of mu-metal which is used to hold the magnet during finishing. In the present experimental study, finishing at a spot on flat titanium alloy is carried out to analyse the forces involved in the finishing. Normal force is the main force responsible for the indentation by the abrasive particles on the workpiece surface. Tangential force helps in removing indented material. The measured normal force and tangential force during the spot finishing are 3.285 N and 0.43 N, respectively. The final surface roughness achieved after spot finishing is 10 nm from initial surface roughness of 200 nm. The percentage improvement in surface roughness is 95%.
Sign-in/Register to access full text options 
Free) 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call
