Fluorinated Carbon Nanotube Superamphiphobic Coating for High-Efficiency and Long-Lasting Underwater Antibiofouling Surfaces.

Abstract

Biofilm formation on the surface of materials has brought great troubles to various industries. Designing surfaces with long-lasting antibiofouling properties can help restrain primary bacterial and protein attachment and subsequent biofilm formation for a long time, which is also of great significance for industrial applications. In this work, we successfully prepared fluorinated carbon nanotubes through a one-step fluorination method using fluorosilane and fabricated a superamphiphobic coating using a simple spray method. This coating with ultralow surface free energy and stable micro/nano structures achieved highly efficient and long-term underwater antibiofouling properties. Tea, milk, BSA, and bacterial solution can bounce highly on this surface without wetting the surface in air. The long-term existence of the underwater air-bubble layer on the surface of the superamphiphobic coating was observed. Thus, this surface can effectively resist BSA and bacterial attachment (E. coli), and the efficiency, respectively, reaches 97.5 and 98.2%. Even if it is fully soaked in BSA and BS solution for 120 h, the whole surface is still able to repel water, BSA, and BS solution very well. In addition, the coating possessed excellent wear resistance, the CAs of BSA and BS solution just decreased slightly (higher than 158°), and the sliding angles increased slightly (lower than 4°) after 50 tape abrasion cycles. Therefore, this superamphiphobic coating may have promising applications for marine devices, biomedical materials, protective clothing, and chemical shielding.