Fluid control with hydrophobic pillars in paper-based microfluidics

Abstract

Paper-based microfluidics has been widely used in chemical and medical analysis applications. In the conventional paper-based microfluidic approach, fluid is propagating inside the porous structure, and the flow direction of the fluid propagation is usually controlled with the pre-defined hydrophobic barrier (e.g. wax). However, the fluid propagation velocity inside the paper-based microfluidic devices largely depends on the material properties of paper and fluid, the relative control method is rarely reported. In this study, a fluid propagation velocity control method is proposed for paper-based microfluidics: hydrophobic pillar arrays with different configurations were deposited in the microchannels in paper-based microfluidics for flow speed control, the result indicates the deposited hydrophobic pillar arrays can effectively slow down the fluid propagation at different levels and can be used to passively control the fluid propagation inside microchannels for paper-based microfluidics. For the demonstration of the proposed fluid control methods, a paper-based microfluidic device for nitrite test in water was also fabricated. The proposed fluid control method for paper-based microfluidics may have significant importance for applications that involve sequenced reactions and more actuate fluid manipulation.