Flow Simulation And Performance Analysis Of Centrifugal Compressor Using Cfd_Tool

Abstract

This paper is concerned the flow simulation and performance analysis of the Centrifugal Compressor Using CFD – Tool. The complex internal flow of centrifugal compressor can be well analyzed, and the unique design system needs to be developed. It should be early to use the interface and also flexible for input and output. A 3-D flow simulation of turbulent – fluid flow is presented to visualize the flow pattern in-terms of velocity, streamline and pressure distribution on the blade surface are graphically interpreted. The standard K- e turbulence model and the simple model algorithm were chosen for turbulence model and pressure distribution well determined. The simulation was steady Heat transfer and moving reference frame was used to consider the impeller interaction under high resolution. Furthermore, A computational Fluid Dynamics (CFD) 3-D simulation is done to analyze the impeller head and efficiency required of centrifugal compressor. The impeller is rotated for a constant revolution and mass flow rate, in this study initially the geometry of centrifugal compressor impeller is created by an ANSYS Vista CCD, and the Blade modeller done by Bladegen, Finally, CFD analysis was performed in ANSYS CFX using the ANSYS Turbo grid meshing tool. According to the analysis, as the number of impeller blades increases, so does the value of the head and power imparted, as well as the impeller’s efficiency.