Abstract
Flow stress can be described as the stress necessary to continue deformation at any stage of plastic strain. The strength coefficient (K) and strain-hardening exponent (n) are the two important flow properties of the material. In the present work, flow properties of three different cast Al-Zn-Mg alloys processed by equal channel angular pressing (ECAP) were investigated. ECAP processing was carried out in a die having Φ = 120º and Ψ = 30º. After ECAP processing, significant grain refinement and increase in the hardness was observed. Compression test was used to determine the flow properties of ECAP processed samples. Force-stroke data was recorded from the compression test. Flow curves were drawn by using force-stroke data. Strength coefficient and strain-hardening exponent were determined from the log-log plot of true stress-strain curves. Significant increase in the strength coefficient was observed after ECAP processing. Also, the strength coefficient is increased when the zinc content is increased in the alloy. Strain-hardening exponent was decreased with increase in the number of ECAP passes.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: IOP Conference Series: Materials Science and Engineering
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
