Abstract
Hot compression tests were performed on K107 cold-work tool steel at various temperatures in range of 800–1200 °C and strain rates of 0.001–1 s−1. The microstructural evolutions including dynamic precipitation (DP) of carbide particles and dynamic recrystallization (DRX) mechanism were investigated by optical and FESEM-EBSD observations. The peak strain of flow curves showed uncommon increase within the temperature range of 900–1100 °C and strain rates of 0.001–0.01 s−1. Optical microscopy observations and image analysis quantifications showed that the uncommon behavior is associated with the formation of fine carbides by DP. At 1100 °C, the rate of DP reaches a maximum and then decreases at higher temperatures. Microstructural observations implied that DP could retard DRX at 900–1100 °C and strain rates of 0.001–0.01 s−1. The discontinuous DRX (DDRX) only appeared at 800 °C as the formation of grain boundary nucleation. At temperature range of 900–1100 °C, intensive DP on the grain boundaries could avoid DDRX. The continuous DRX (CDRX) was found as the major mechanism of dynamic softening at 900–1100 °C. It was found that the subgrain growth and progressive rotation lead to the transformation of sub-boundaries into high angle grain boundaries and propel CDRX.
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call