Abstract
Abstract In the present study, a traveling wave wall (TWW) was employed to manipulate the vortex shedding behind a fixed circular cylinder based on a 2-D CFD numerical simulation method at a low Reynolds number of 200. The study mainly focused on four types of TWW propagation directions combined with nine different wave velocities to eliminate vortex shedding, and the lift and drag coefficients and vortex shedding modes at different propagation directions or velocities were analyzed in detail to access the effectiveness of the TWW flow control method. The control mechanism of eliminating wake stemming from the flow around a TWW-controlled circular cylinder was revealed by the boundary vorticity flux (BVF) and relative flow fields. The results show that the type of downstream propagating TWW can effectively eliminate the alternating wake. When the ratio of the wave velocity to the oncoming velocity is 2.0, the fluctuations of the lift coefficients descended to the lowest point. The averages of the drag coefficients decreased with increasing wave velocity and descended to the lowest point when the ratio of the wave velocity to the oncoming velocity was 5.0. Owing to the capture of small-scale vortices, there was a relatively larger level of vorticity in the wave valley of the TWW cylinder. The relative flow fields showed that the vortex shedding from the cylinder was completely eliminated and that the goal of eliminating the oscillating wake and suppressing the potential vortex-induced vibration (VIV) of flow around a cylinder was achieved.
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call