Abstract
Natural convective flows around upward-facing horizontal heated plate with a vertical plate at the edge were investigated experimentally. The widths of horizontal heated plates, W, and the heights of vertical plates, H, were varied systematically as W=100-350 mm and H=0-150 mm. The flow fields and the surface temperatures of the horizontal plates were visualized with dye and liquid crystal thermometry. The result shows that the vertical plate blocks incoming flow from the edge, and that the flow entering from the open edge covers the whole horizontal surface when the height of the vertical plate exceeds H/W =0.14 for the adiabatic vertical plate and H/W =0.1 for the heated vertical plate. The local heat-transfer-coefficients of the horizontal plate were also measured. The results show that the vertical adiabatic plate depresses the heat transfer while that the heated vertical plate enhances the heat transfer from the horizontal plates.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series B
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.