Abstract
Abstract A numerical study based on steady RANS with the SST turbulence model was performed to investigate the flow and heat transfer in a ribbed U-duct with a rectangular cross section that converges linearly in the radially outward direction and diverges linearly in the radially inward direction under rotating and non-rotating conditions. Parameters examined include rotation number (Roi = 0, 0.0219, 0.0336, 0.0731), Reynolds number (Rei = 46,000, 100,000, and 154,000), and the duct's taper angle (α = 0° and 1.41°) under conditions relevant to gas turbines used for electric power generation. Results obtained show that increasing the taper angle from 0° to 1.41°, which appears negligibly small, significantly increases both the friction coefficient and the Nusselt number whether there is rotation or not. With rotation at Roi = 0.0336 and Rei = 100,000, the maximum increase in the average friction coefficient and Nusselt number was found to be 41.7% and 36.6% respectively. Without rotation at Rei = 46,000, those are 11.5% and 14.7% respectively.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
