Abstract
AbstractRecently, polymeric nanofibres have been considered for the rapid flocculation and dewatering of oil sands tailings. Apparently due to their fast initial interaction with the suspended fine particles, polymer nanofibres performed better than their parent water‐soluble polymer solutions. To further understand this mechanism, a model study was conducted using kaolin suspensions and poly(acrylamide‐co‐diallyl dimethylammonium chloride) nanofibres and powders. The initial settling rate, supernatant turbidity, water recovery, capillary suction time, and solids content were measured to determine the effect of using nanofibres on solid‐liquid separation. Nanofibres performed similarly to, or better than, equivalent polymer solutions in terms of initial settling rate and supernatant clarity at higher dosages and kaolin loadings. The kaolin studies showed that polymer nanofibres could absorb onto clay particles faster, and produce bigger flocs more rapidly, supposedly due to their high surface area to volume ratio. Our results indicate that polymer nanofibres, as well as polymer powders, may be successfully used to treat mature fine tailings produced from oil sands.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.