Flexural strength of polymethyl methacrylate reinforced with high-performance polymer and metal mesh

Abstract

Background: The flexural strength (FS) of a denture base material is of great concern, and many approaches have been used to strengthen the denture acrylic resins. The present study aimed to evaluate the effect of high-performance polymer (BioHPP) and metal mesh reinforcement on the FS of a heat-cured poly methyl methacrylate (PMMA) acrylic resin. Materials and Methods: This experimental study was done on 30 rectangular specimens (64 mm × 13 mm × 3 mm) of a heat-cured PMMA resin. The specimens were divided into three groups (n = 10) to be reinforced with either metal mesh or BioHPP mesh; one group was left nonreinforced, serving as the control group. The FS of specimens was assessed through a 3-point bending test by using a universal testing machine at a crosshead speed of 2 mm/min. Kruskal–Wallis H and Dunn's post hoc tests were used to compare the FS among the groups (alpha = 0.05). Results: The FS in the metal-reinforced group was statistically significantly higher than the two other groups (P < 0.001). However, the FS of the BioHPP-reinforced samples was not statistically significantly higher than the nonreinforced ones (P = 0.614). Conclusion: Reinforcing the PMMA with metal mesh significantly enhances its FS while BioHPP has no significant effect on the PMMA FS.