Abstract

This study investigates an experimental and analytical study on the flexural, failure, and viscoelastic properties of hybrid and non-hybrid composite laminates at increasing temperatures and frequencies. Carbon, glass, and hybrids of the two fibre materials with stacking sequences of [0/90]s were considered, and specimens were prepared via the resin transfer moulding method. Three-point bending and dynamic mechanical analysis tools were used. The failure surfaces of the laminates were examined using a scanning electron microscope. The results indicated that the flexural strength, modulus, and strain at failure of all groups of laminates decreased as the temperature increased. In particular, the storage modulus, damping factor, flexural strength, and flexural modulus properties of all groups of laminates increased as the hybrid ratio decreased on each targeted temperature and frequency test. However, the strain at failure increased as the hybrid ratio increased. Additionally, results obtained from the scanning electron microscope images confirmed that combinations of delamination and debonding failure modes were observed on the stacking sequences of [0]s and [90]s layers of bidirectional laminates. Finally, a comparison between the storage modulus results of all groups of laminates was conducted with three empirical models. The empirical model developed by Gibson et al. provided the most accurate prediction for all groups of laminates in the targeted temperature and frequency range. The predictions using the remaining empirical models were broadly similar. Further work is needed to optimise the empirical parameters and minimise the errors.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call