Abstract
An experimental program was undertaken at The University of Manitoba to test timber stringers strengthened with glass fibre reinforced polymer (GFRP) bars. Various strengthening schemes were investigated as a means of increasing the load carrying capacity of timber stringers in shear and flexure. The shear strengthening was achieved by inserting GFRP dowels in the centre of the cross section along the length of the stringers. The flexural strengthening used the concept of near-surface-mounted GFRP bars. Fifty beams were tested to evaluate the performance of the various strengthening schemes. The behaviour of the beams is described in terms of mode of failure, mechanical properties, and load–deflection behaviour. This study found that strengthening timber stringers with GFRP reinforcement increased the ultimate strength of the stringers and reduced its variability. It is believed that the shear and flexural GFRP reinforcements act as a truss member within the timber beam and bridge the local defects and discontinuities of the timber.Key words: timber, glass fibre reinforced polymer, bridge, stringers, dowels, strengthening, ductility.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
