Abstract
A test program was conducted to confirm experimentally the validity of the exact point-speed influence coefficient method for balancing rotating machinery, and to assess the practical aspects of applying the method to flexible rotors. Testing was performed with a machine having a 41-in. long, 126-lb rotor. The rotor was operated over a speed range encompassing three rotor-bearing system critical speeds: two “rigid-body” criticals and one flexural critical. Rotor damping at the flexural critical was very low due to the journal bearings being located at the nodal points of the shaft. The balancing method was evaluated for three different conditions of initial rotor unbalance. The method was found to be effective and practical. Safe passage through all the critical speeds was obtained after a reasonable number of balancing runs. Success of the balancing method was, in large part, due to the accuracy of the instrumentation system used to obtain phase-angle measurements during the balancing procedure.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
