Abstract
AbstractFor lithium‐ion batteries, iron‐based oxides are expected to be the next generation of anode materials because of their high theoretical capacity, environmental friendliness, and affordability. Although, like most transition metal oxides, iron‐based oxides suffer from poor electrical conductivity and cycling performance, volume expansion during charging and discharging, and easily agglomerated. g‐C3N4 has a graphene‐like layered structure consisting of nitrogen‐linked C6N7 repeating units. The abundant nitrogen content can improve the wettability of the electrode and electrolyte, thus improving the lithium charge transfer process, and secondly g‐C3N4 is less expensive and easier to prepare than graphene. Here, we report composites with metal oxide nanosheets (ZnFe2O4−Fe2O3) attached to softly curved g‐C3N4 nanosheets. When used as an anode material for lithium‐ion batteries, after 300 cycles at the current density of 500 mA g−1, ZFO‐Fe2O3/g‐C3N4 offers the discharge specific capacity (1518.5 mAh g−1) and can still deliver 639.2 mAh g−1 at the high current density (10 A g−1). Due to the introduction of g‐C3N4 alleviated the volume change of the electrode, shortened the diffusion distance of Li+ and provided more reactive sites, resulting in excellent electrochemical performance of ZFO‐Fe2O3/g‐C3N4.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.