Abstract
GaAs photovoltaic (PV) cells have been extensively studied for flexible energy harvesting devices due to their merits such as thin-film feasibility, flexibility, and high-efficiency. However, GaAs-based thin-film PV cells have a limitation for the applications in wearable platform since they are not compatible with fabric carrier. To handle this problem, we report thin-film transfer technique that involves a sacrificial layer with a double-layer structure, an Au–Au bonding technique, a Cr/Au bilayer to induce metal stress, and an etchant for fast epitaxial lift-off (ELO). In addition, a polyimide layer attached underneath the fabric substrate not only protects the fragile epi layer but also accelerates the lateral etching via spontaneous bending. The application of these techniques enables the successful transfer of GaAs thin-film PV epi structures onto fabric platform without degrading crystal quality. Fabric-based GaAs PV cells are fabricated via the standard PV cell fabrication process. The platform expansion of GaAs thin-film techniques has great potential for large-scale commercialization. • III-V epi-layers onto fabric substrate can be realized without degrading crystal quality. • The GaAs solar cells are directly integrated with fabric platform. • High efficiencies over 17.49% can be achieved on fabric platform. • Fabric-based GaAs solar cells present the stable output power with high flexibility.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
