Abstract
The modification of Novolac epoxy with the organophosphorus compound 9,10-dihydro-9-oxa-10-phosphaphenanthren-10-oxide (DOPO) to reduce flammability and its influence on curing reactions has been investigated. Three aromatic diamine curing agents were used, namely 4,4′-diaminodiphenylmethane (DDM), 4,4′-diaminodiphenylsulphone (DDS), and diethyltoluenediamine (DETDA). The thermal stability and dynamic-mechanical behaviour of the cured resin depend on interactions of the curing agent with DOPO. The onset degradation temperature decreased with increasing phosphorus content, indicating the influence of DOPO on thermal stability. The DDM 3 %P sample exhibited the highest glass transition (Tg) of 136 °C, while DDS-crosslinked simples displayed the highest Tg of 147 °C among all samples. An improvement in the reaction of Novolac epoxy to fire was achieved by incorporating DOPO compound, as indicated by cone calorimetry results, showing up to a 67 % reduction in the peak heat release rate (pHRR) and 53 % reduction in total heat release (THR) for DDM 3 %P. The modified samples containing DOPO presented a self-extinguishing performance, displaying a UL-94 V-0 rating and a limiting oxygen index (LOI) values reached a maximum of 37.1 % for DDM 3 %P, with less flame propagation than for neat Novolac epoxy.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callSimilar Papers
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
