Flame spread characteristics and a multi-cylinder radiation model for diesel tray fires against a sidewall

Abstract

A series of experiments were conducted to study the flame spread and radiation characteristics for diesel tray fires against a sidewall. The tray width and the height of the sidewall were varied. The flame spread appearances and rate, subsurface flow and transverse fuel surface temperature were analyzed. Results showed that the sidewall has a great influence on the flame spread behavior due to its restriction on air entrainment. The flame distribution was uneven along the length of the tray, and the front propagating flame inclines to the tray outboard side edge (i.e. the tray's long side that is not attaching to the sidewall) for more oxygen, then more heat transferred from the flame through tray wall to the fuel results in uneven surface temperature profiles. The main flame being one short distance away from the flame spread front is against the sidewall. When the ratio of the sidewall height to the tray width, H/W, is less than 1, both the flame spread rate and subsurface flow increase with the increasing H/W, due to enhanced heat transfer. For H/W > 1, both of these parameters decrease with the increasing H/W, indicating a strong restriction of air entrainment by the sidewall. To estimate the flame radiation to the fuel surface during propagation, a multi-cylinder radiation model was proposed. By dividing the whole flame into several cylindrical sub-flames, the radiation blockage and sidewall effects are considered in the model. The comparison of calculated and measured radiation heat fluxes shows that the proposed model is reliable with a maximum error of 20%. These findings will provide scientific supports to fire monitoring and contribute to estimating radiative heat flux of spreading flame.