Flame-Retarded and Heat-Resistant PP Compounds for Halogen-Free Low-Smoke Cable Protection Pipes (HFLS Conduits).

Abstract

Conduits are plastic tubes extensively used to safeguard electrical cables, traditionally made from PVC. Recent safety guidelines seek alternatives due to PVC's emission of thick smoke and toxic gases upon fire incidents. Polypropylene (PP) is emerging as a viable alternative but requires modification with suitable halogen-free additives to attain flame retardancy (FR) while maintaining high mechanical strength and weathering resistance, especially for outdoor applications. The objective of this study was to develop two FR systems for PP: one comprising a cyclic phosphonate ester and a monomeric N-alkoxy hindered amine adjuvant achieving V0, and another with hypophosphite and bromine moieties, along with a NOR-HAS adjuvant achieving V2. FR performance along with mechanical properties, physicochemical characterization, and dielectric behavior were evaluated prior to and after 2000 h of UV weathering or heat ageing. The developed FR systems set the basis for the production of industrial-scale masterbatches, from which further optimization to minimize FR content was performed via melt mixing with PP towards industrialization of a low-cost FR formulation. Accordingly, two types of corrugated conduits (ø20 mm) were manufactured. Their performance in terms of flame propagation, impact resistance, smoke density, and accelerated UV weathering stability classified them as Halogen Free Low Smoke (HFLS) conduits; meanwhile, they meet EU conduit standards without significantly impacting conduit properties or industrial processing efficiency.