Abstract

Silicon material electrodes as proton carriers for high-capacity proton battery have only been proposed for such a short period of time that their physicochemical properties and electrochemical hydrogen storage behavior during charge and discharge processes remain nearly uncharted territory. Herein, the hydrogenated amorphous silicon (a-Si:H) thin film electrodes are prepared by radio frequency sputtering followed by ex-situ hydrogenation. The electrochemical properties of a-Si:H electrodes are tested experimentally, and the electrochemical hydrogen storage behaviors of a-Si:H electrodes are analyzed by first-principles calculations. The results show that the hydrogenation process significantly increases the electrochemical capacity of the electrodes and reduces the band gap of the electrode structure. The electrode exhibits weak conductivity during the initial charging, but the instability of the electrode electronic structure during the later charging results in a slight fluctuation of the electrochemical charging process. The a-Si:H electrode have better electrochemical hydrogen storage/release reversibility than non-hydrogenated electrodes, but this reversibility is weakened by oxygen atoms covered on the electrode surface. The electrochemical hydrogen storage process is easier to accomplish than the electrochemical desorption process of hydrogen evolution reaction for the a-Si:H electrodes. The a-Si:H thin film electrode is more stable on the Ni(111) substrate surface and the good conductivity of the electrode/substrate interface provides convenient conditions for the free transport of electrons in the electrochemical charge/discharge processes. We believe that these results perfectly explain the microscopic mechanisms responsible for the electrode reaction and electrochemical behavior of a-Si:H electrodes in this type of proton battery, and have a certain reference value in understanding the physicochemical properties and electrochemical hydrogen storage behavior of silicon material electrodes applied to other types of batteries during charge/discharge processes.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call