First six months quality assessment of HY-2A SCAT wind products using in situ measurements

Abstract

The first Chinese microwave ocean environment satellite HY-2A, carrying a Ku-band scatteromenter (SCAT), was successfully launched in August 2011. The first quality assessment of HY-2A SCAT wind products is presented through the comparison of the first 6 months operationally released SCAT products with in situ data. The in situ winds from the National Data Buoy Center (NDBC) buoys, R/V Polarstern, Aurora Australis, Roger Revelle and PY30-1 oil platform, were converted to the 10 m equivalent neutral winds. The temporal and spatial differences between the HY-2A SCAT and the in situ observations were limited to less than 5 min and 12.5 km. For HY-2A SCAT wind speed products, the comparison and analysis using the NDBC buoys yield a bias of −0.49 m/s, a root mean square error (RMSE) of 1.3 m/s and an increase negative bias with increasing wind speed observation above 3m/s. Although less accurate of HY-2A SCAT wind direction at low winds, the RMSE of 19.19° with a bias of 0.92° is found for wind speeds higher than 3 m/s. These results are found consistent with those from R/Vs and oil platform comparisons. Moreover, the NDBC buoy comparison results also suggest that the accuracy of HY-2A SCAT winds is consistent over the first half year of 2012. The encouraging assessment results over the first 6 months show that wind products from HY-2A SCAT will be useful for scientific community.