Abstract
This paper studies the impact of bullet with aluminum alloy plate fixed on all sides. Simulations were carried out to study effect of bullet impact angle and thickness of aluminium alloy plates. These simulations were performed using Finite Element Method implemented through Ansys Workbench. The target plate was struck at 0°, 15°, 30° and 45° obliquely and the impact velocity was 830 m/s in all tests. The results showed a critical oblique angle, which comes out to be 45°, at which the penetration process changes from perforation to ricochet. The other simulation was done to determine the thickness of the plate at which the penetration process changes from perforation to embedment. Simulation was done for plate thickness of 2mm, 6mm, 10mm, 15mm, 20mm and 30mm. It was observed that for thickness of 18mm and above, complete penetration does not occur.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.