Abstract
ABSTRACTIn this paper, the arbitrary Lagrangian Eulerian formulation is employed for finite element modelling of dynamic crack propagation problem. The application phase simulation of computational dynamic fracture is applied to model by which the crack propagation history and variation of crack velocity are predicted using the material dynamic fracture toughness. The dynamic solution of problem is accomplished using the implicit time integration method. The convective terms due to mesh‐material motion are taken into account via the convection equation. A robust and efficient mesh motion technique, that its equations need not to be solved at every time step, is employed in Eulerian phase. The mesh connectivity is preserved during the analysis. So, the successive remeshing of model is eliminated. When the dynamic fracture criterion is satisfied for crack growth, the presented algorithm allows the crack to advance by splitting the material particle at the crack tip. The dynamic energy release rate is calculated at each time step to determine dynamic stress intensity factor. The predicted results are compared with those obtained through the experimental study and remeshing technique cited in the literature. The proposed computational algorithm leads to an accurate and efficient simulation of dynamic crack propagation process.
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call