Finite Element Simulation for Quality Dependent Lifetime Analysis of Micro Gears

Abstract

Abstract Nowadays, micro motors are used in combination with micro transmissions in manifold industrial applications such as dental drills or the equipment for minimally invasive surgery in the medical industry, hexapod micro positioning systems for wafer processing in the field of industrial automation or adjustable automotive components such as fixings of LCD monitors. Micro transmissions consist of micro gears, which are critical to their functionality. Micro gears are typically defined as gears with a module which is lower than 200 μm. To ensure proper operation of the micro gears for their expected purpose, a reliable prediction of their lifetime is crucial. Lifetime evaluation is particularly important for micro gears, as the influence of their geometric shape deviations on their load rating is significantly higher in comparison to gears with larger modules. This is a consequence of the larger shape deviations of micro gears in relation to their part size due to their manufacturing processes. The lifetime of micro gears can be evaluated by an experimental approach. Within this a pair of micro gears is systematically worn under realistic, clearly defined conditions, until a defect of one of the micro gears can be detected. This can be conducted by means of a highly precise experimental setup. In this article, a methodology to calculate the characteristic loads at the tooth flanks of the pair of micro gears during the experiments based on finite element analysis is introduced. For this purpose, CAD models of the real gear geometry of the specimen are deducted by means of high precision 3D measurements and spline interpolation. On the basis of these data, the lifetime of the micro gears dependent on their shape deviations can be predicted by means of a model based on reliability statistics.