Finite Element Analysis of Gasket in Pressure Vessel

Abstract

Abstract: Pressure vessel is a closed container designed to hold liquids or gases at a pressure which are higher than the surrounding atmospheric pressure. These pressure vessels are not made as a single component but manufacture with an assembly of many other components and connected through bolted joints or riveted joints or welded joints. These joints are susceptible to failure and cause leakage of the liquid or gas which are very dangerous and sometimes causes heavy loss of life, health and property. Hence proper care has to be taken during the design analysis processes by following ASME section VIII division 1 which specifies the design-by-formula approach while division 2 contains a set of alternative rules based on design by Analysis (FEA) to determine the expected deformation and stresses that may develop during operation. The ASME section-VIII division-2 standards are used for the design of pressure vessel. Leakage in gasketed flanged joints have always been a great problem for the process industry. The sealing performance of a gasketed flanged joints depends on its installation and applied loading conditions. The present project work involves the design procedure and stress analysis (Structural Analysis) for the leak proof pressure vessel at the gasket under three different gasket conditions. Keywords: 1. FEM, 2. ASME, 3. ANSYS, 4. Gasket,5. Displacement,6. Stress