Abstract

Selective laser melting (SLM) of titanium–aluminium (TiAl) alloy components has gained significant attention in the modern industrial world. The flexibility of the SLM process in producing complex shapes with minimum utilization of material and energy makes it dominant over other manufacturing techniques. As aerospace and biomedical industries demand complex-shaped TiAl alloy components, part fabrication using SLM becomes the ultimate solution. However, the unacceptable level of surface integrity and anisotropic behavior of SLM components demand post processing operations such as laser polishing, chemical polishing, and conventional polishing methods. In this study, a recently developed polishing method called wire electrical discharge polishing (WEDP) is performed on TiAl alloys for obtaining a smooth and defect-free surface. This study aims to investigate the micro-layer modification occurring to the WEDP-processed surface in detail. The experimental results establish the effectiveness of WEDP method in terms of improved surface integrity. The surface finish (Sa) got enhanced by ~88% after WEDP processing. In addition, the thickness of recast layer formed by WEDP was found to be minimum. Moreover, post-processing of TiAl alloy resulted in better surface morphology specifically at lower settings of peak current. It is noteworthy that the migration of wire material was minimum with zinc-coated brass electrode compared to the normal brass electrode. Hence, coated wire electrodes are recommended for WEDP process. In short, an excellent surface integrity can be achieved using WEDP process through favorable surface modification aided by lower peak current and coated wire electrodes. Furthermore, less electrode wear observed in WEDP process enables the deployment of lower feed rates leading to minimal electrode consumption.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call