Filtration and dust cake experiment by ceramic candle filter in high temperature conditions

Abstract

Particulate collection at high temperature and high pressure (HTHP) is important in an advanced coal power generation system not only to improve the thermal efficiency of the system, but also to prevent the gas turbine from erosion and to meet the emission limits of the effluent gas. The specifications for particulate collection in those systems such as Integrated Gasification Combined Cycle (IGCC) and Pressurized Fluidized Bed Combustion (PFBC) require absolutely high collection efficiency and reliability. Advanced cyclone, granular bed filter, electrostatic pre- cipitator, and ceramic filter have been developed for particulate collection in the advanced coal power generation system. However, rigid ceramic filters and granular bed filters among them show the best potential. The problems experienced of these systems on performance, materials, and mechanical design were investigated. Ceramic candle filters have the best potential for IGCC at this moment because they have nearly the highest efficiency compared with other filtering systems and have accumulated many reliable design data from many field experiences. The purpose of this study was to investigate the efficiency of ceramic filters and stability of material against high temperature and long- term operation condition by applying fly ash on the surface of the filter and relation of pressure drop and dust cake thickness. Experimental conditions were 50 hours at 450 o C, 650 o C and 850 o C.