Abstract
ABSTRACTOptimization of the radio frequency (RF) transmitter performance in envelope tracking (ET) and envelope elimination and restoration (EER) techniques directly implies optimization of the envelope amplifier (EA) design. Since EA should have fast dynamic response together with high efficiency, synchronous buck is a suitable topology for this kind of application. The key issues for optimization of the converter design are the characteristics of the switching devices, the LC filter design, and the driving circuit for the switches. In this paper, design optimization of the LC filter for sinusoidal output voltage together with new technological solution for switching devices based on gallium nitride is proposed, while the applied drivers are commercially available ones, suitable for aforementioned GaN switches. Design of the output filter in synchronous buck converter for high-frequency application is important from two points of view: the first one is sufficient attenuation of the unwanted harmonics of the switching frequency so that envelope reference has minimum level of distortion and the second one is the overall impact of the filter design on the converter's efficiency. In order to increase the efficiency, the LC filter should be designed in a way to obtain compromise between the conduction and switching losses of the buck converter. In the case of sinusoidal output voltage, filter design parameter has been defined as the ratio between the maximum values of the inductor current and load current and power losses dependence on this parameter has been obtained. Theoretically obtained optimum design has been confirmed through experimental measurements, where four different designs were built and tested. On the other hand, application of new switching devices based on gallium nitride provided significant efficiency enhancement in comparison to Si MOSFETs and laterally diffused MOS transistors, due to the lower values of the gate charge and on-resistance. Tests with 64QAM and wideband code division multiple access (WCDMA) RF signals showed that these devices are the best choice for this kind of application, where the main challenge is to increase the efficiency of the signal transmission simultaneously with the bandwidth.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
