Field emission from α-Fe2O3 nanoflakes: Effect of vacuum pressure, gas adsorption and in-situ thermal treatment

Abstract

The effects of vacuum pressure and gas adsorption on field emission current of α-Fe2O3 nanoflakes were studied. It was found that field emission current of α-Fe2O3 nanoflakes decreased with increasing pressure. The field emission current decreased when N2 or O2 was introduced into chamber, while no obvious change was observed for H2 gas. An in-situ thermal treatment was carried out to eradicate the effect of absorbed gas. After the in-situ thermal treatment, the field emission current density was largely enhanced from 60 to 500μA/cm2 under applied electrical field of 10MV/m and the turn on field (Eturn-on) decreased from 7.6 to 5.2MV/m. The lowered turn-on field was attributed to the decrease of surface work function induced by surface gas desorption and reduction of α-Fe2O3 nanoflakes. Moreover, the improvement of field emission performance can be retained in high vacuum condition, which indicates the in-situ thermal treatment is an efficient method to improve field emission properties of α-Fe2O3 nanoflakes.